|
See our emotional company Video |
|
Our R&D
The Siderforgerossi R&D Department consists of more than ten highly skilled Product, Process, Material Engineers and Metallurgists. They focus upon the continuous improvement of our processes, to ensure that all products meet each client’s exacting standards and technical requirements.
In 2010, the Company started its cooperation with the Department of Management and Engineering (DTG) - Vicenza campus of Padova University. This collaboration has enabled Siderforgerossi to manufacture the Ni-based superalloys, duplex and superduplex stainless steels using state-of-the-art techniques. Furthermore, several scientific papers and Master Degree thesis, for both metallurgical and management matters, have been published over the years as reported in the following list.
P. Ferro, F. Bonollo, G. Timelli, M. Longin and M. Viotto.
Effect of microstructure and test temperature on impact toughness of superduplex stainless steel UNS S32760.
Proceedings of the 7th European Stainless Steel Conference. Como, 2011.
P. Ferro, F. Bonollo, G. Timelli, M. Longin and M. Viotto.
Sigma phase precipitation modelling in a UNS S32760 superduplex stainless steel.
Proceedings of the 7th European Stainless Steel Conference. Como, 2011.
S. Coin (supervisors F. Bonollo and D. Crestanello).
Prodotti forgiati in superlega: studio di mercato.
Thesis, University of Padova, Vicenza, 2012.
D. Pozza (supervisors F. Bonollo and G. Timelli).
Caratterizzazione microstrutturale di componenti forgiati in acciaio inossidabile austeno ferritico.
Thesis, University of Padova, Vicenza, 2012.
A. Dal Santo (supervisors F. Bonollo, P. Ferro, M. Longin and A. Meda)
Studio numerico e sperimentale del ciclo di pre-riscaldo di lingotti in acciaio ASTM A350.
Thesis, University of Padova, Vicenza, 2013.
M. Simonetto (supervisors F. Bonollo, G. de Liberato, M. Longin, R. Schiro)
Studio mediante tecniche LCA della produzione di forgiati in acciaio.
Thesis, University of Padova, Vicenza, 2013.
P. Ferro, F. Bonollo, G. Mazzacavallo, G. Timelli, A. Fabrizi, M. Longin and M. Viotto.
Solubilizzazione isoterma della fase sigma in un acciaio superduplex UNS S32760.
La Metallurgia Italiana, 2013, 5, 25-29.
A. Dal Santo, M. Longin, P. Ferro and F. Bonollo.
Numerical and experimental study of pre-forging heating process of heavy-section steel.
Proceedings of the Ingot casting, rolling, forging - 2nd International Conference. Milano, 2014.
G. Camicia, M. Longin, P. Ferro and F. Bonollo.
Acciai inossidabili duplex sottoposti a HISC in applicazioni offshore: ruolo, caratterizzazione e controllo dell’austenite spacing.
Proceedings of the Giornata di Studio AIM Materiali per Oil & Gas in superleghe e acciai inossidabili. Milano, 2015.
F. Carta (supervisors F. Bonollo, M. Longin and G. Camicia).
Caratterizzazione microstrutturale di componenti in acciaio inossidabile bifasici.
Thesis, University of Padova, Vicenza, 2016.
V. Foltran (supervisors G. Timelli, S. Zorzi, G. de Liberato, G. Camicia, G. Kral, R. Schiro).
Applicazioni di metodologie LCA nella produzione di componenti forgiati in acciaio.
Thesis, University of Padova, Vicenza, 2016.
C. Menegozzo (supervisors F. Bonollo, M. Longin and G. Camicia).
Effetto dei parametri di trattamento termico sulle proprietà meccaniche di componenti forgiati in UNS N06625.
Thesis, University of Padova, Vicenza, 2016.
G. Camicia, M. Longin, P. Ferro and F. Bonollo.
Effects of solution annealing temperature and quenching transfer time on austenite spacing of duplex stainless steels forgings.
Proceedings of the Duplex World Seminar & Summit. Düsseldorf, 2016.
P. Ferro, A. Fabrizi, F. Bonollo, and M. Longin
Recent advances in dissolution kinetics of sigma phase in duplex stainless steels
Proceedings of the Duplex World Seminar & Summit. Düsseldorf, 2016.
F. Manfrin (supervisors F. Bonollo and M. Longin)
Studio dell’effetto dei parametri di trattamento termico sulla microstruttura di componenti forgiati in acciaio 18CrNiMo7-6
Thesis, University of Padova, Vicenza, 2016.
M. Longin
Laboratori e NDT accreditati ISO/IEC 17025:2005 vantaggi e svantaggi
Proceedings of Corso forgiatori AIM. Brescia, 2017.
G. Camicia, M. Longin, P. Ferro and F. Bonollo.
Chromium nitrides effects on low temperature impact toughness and durability of duplex stainless steels forgings.
Proceedings of the 9th European Stainless Steel Conference - Science & Market and 5th European Duplex Stainless Steel Conference & Exhibition. Bergamo, 2017
G. Camicia, M. Longin, C. Menegozzo, P. Ferro and F. Bonollo.
Heat treatment effects on microstructure, mechanical properties and durability of UNS N06625 rolled rings for Oil & Gas applications
Proceedings of the 20th International Forgemasters Meeting - IFM 2017. Graz, 2017
G. Camicia and M. Longin
Heat treatment design of low alloyed steels forgings for Arctic applications
Proceedings of the NACE 2nd Conference & Expo. Genoa, 2018
G. Camicia, M. Longin, C. Menegozzo, P. Ferro, A. Fabrizi and F. Bonollo
Time-temperature effects on the microstructure of alloy 718 rolled rings for aircrafts engines
Seventh International Conference on Recrystallization and Grain Growth. Ghent, 2019
In 2010, the Company started its cooperation with the Department of Management and Engineering (DTG) - Vicenza campus of Padova University. This collaboration has enabled Siderforgerossi to manufacture the Ni-based superalloys, duplex and superduplex stainless steels using state-of-the-art techniques. Furthermore, several scientific papers and Master Degree thesis, for both metallurgical and management matters, have been published over the years as reported in the following list.
P. Ferro, F. Bonollo, G. Timelli, M. Longin and M. Viotto.
Effect of microstructure and test temperature on impact toughness of superduplex stainless steel UNS S32760.
Proceedings of the 7th European Stainless Steel Conference. Como, 2011.
P. Ferro, F. Bonollo, G. Timelli, M. Longin and M. Viotto.
Sigma phase precipitation modelling in a UNS S32760 superduplex stainless steel.
Proceedings of the 7th European Stainless Steel Conference. Como, 2011.
S. Coin (supervisors F. Bonollo and D. Crestanello).
Prodotti forgiati in superlega: studio di mercato.
Thesis, University of Padova, Vicenza, 2012.
D. Pozza (supervisors F. Bonollo and G. Timelli).
Caratterizzazione microstrutturale di componenti forgiati in acciaio inossidabile austeno ferritico.
Thesis, University of Padova, Vicenza, 2012.
A. Dal Santo (supervisors F. Bonollo, P. Ferro, M. Longin and A. Meda)
Studio numerico e sperimentale del ciclo di pre-riscaldo di lingotti in acciaio ASTM A350.
Thesis, University of Padova, Vicenza, 2013.
M. Simonetto (supervisors F. Bonollo, G. de Liberato, M. Longin, R. Schiro)
Studio mediante tecniche LCA della produzione di forgiati in acciaio.
Thesis, University of Padova, Vicenza, 2013.
P. Ferro, F. Bonollo, G. Mazzacavallo, G. Timelli, A. Fabrizi, M. Longin and M. Viotto.
Solubilizzazione isoterma della fase sigma in un acciaio superduplex UNS S32760.
La Metallurgia Italiana, 2013, 5, 25-29.
A. Dal Santo, M. Longin, P. Ferro and F. Bonollo.
Numerical and experimental study of pre-forging heating process of heavy-section steel.
Proceedings of the Ingot casting, rolling, forging - 2nd International Conference. Milano, 2014.
G. Camicia, M. Longin, P. Ferro and F. Bonollo.
Acciai inossidabili duplex sottoposti a HISC in applicazioni offshore: ruolo, caratterizzazione e controllo dell’austenite spacing.
Proceedings of the Giornata di Studio AIM Materiali per Oil & Gas in superleghe e acciai inossidabili. Milano, 2015.
F. Carta (supervisors F. Bonollo, M. Longin and G. Camicia).
Caratterizzazione microstrutturale di componenti in acciaio inossidabile bifasici.
Thesis, University of Padova, Vicenza, 2016.
V. Foltran (supervisors G. Timelli, S. Zorzi, G. de Liberato, G. Camicia, G. Kral, R. Schiro).
Applicazioni di metodologie LCA nella produzione di componenti forgiati in acciaio.
Thesis, University of Padova, Vicenza, 2016.
C. Menegozzo (supervisors F. Bonollo, M. Longin and G. Camicia).
Effetto dei parametri di trattamento termico sulle proprietà meccaniche di componenti forgiati in UNS N06625.
Thesis, University of Padova, Vicenza, 2016.
G. Camicia, M. Longin, P. Ferro and F. Bonollo.
Effects of solution annealing temperature and quenching transfer time on austenite spacing of duplex stainless steels forgings.
Proceedings of the Duplex World Seminar & Summit. Düsseldorf, 2016.
P. Ferro, A. Fabrizi, F. Bonollo, and M. Longin
Recent advances in dissolution kinetics of sigma phase in duplex stainless steels
Proceedings of the Duplex World Seminar & Summit. Düsseldorf, 2016.
F. Manfrin (supervisors F. Bonollo and M. Longin)
Studio dell’effetto dei parametri di trattamento termico sulla microstruttura di componenti forgiati in acciaio 18CrNiMo7-6
Thesis, University of Padova, Vicenza, 2016.
M. Longin
Laboratori e NDT accreditati ISO/IEC 17025:2005 vantaggi e svantaggi
Proceedings of Corso forgiatori AIM. Brescia, 2017.
G. Camicia, M. Longin, P. Ferro and F. Bonollo.
Chromium nitrides effects on low temperature impact toughness and durability of duplex stainless steels forgings.
Proceedings of the 9th European Stainless Steel Conference - Science & Market and 5th European Duplex Stainless Steel Conference & Exhibition. Bergamo, 2017
G. Camicia, M. Longin, C. Menegozzo, P. Ferro and F. Bonollo.
Heat treatment effects on microstructure, mechanical properties and durability of UNS N06625 rolled rings for Oil & Gas applications
Proceedings of the 20th International Forgemasters Meeting - IFM 2017. Graz, 2017
G. Camicia and M. Longin
Heat treatment design of low alloyed steels forgings for Arctic applications
Proceedings of the NACE 2nd Conference & Expo. Genoa, 2018
G. Camicia, M. Longin, C. Menegozzo, P. Ferro, A. Fabrizi and F. Bonollo
Time-temperature effects on the microstructure of alloy 718 rolled rings for aircrafts engines
Seventh International Conference on Recrystallization and Grain Growth. Ghent, 2019